PFT Accessories guide

Mortar

Mortar

Reinforcing mortar

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
20118400 ROTOQUIRL cpl. with couplings Picture
00010543 Stator D 4-3 PIN TWISTER green Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture
20195000 ZARGOMAT- and gluing gun with 15 m cable, 25 female part Picture
20200330 Adapter coupling 35-/25 male Picture
00102228 Mortar pressure gauge 35 mm Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20117000 Clamp D-pumps Picture
20115310 Stator D 4-3, 1/2 output, green,for clamp Picture
20114320 Rotor D 4-3 with pin Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Bonding mortar

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture
20118400 ROTOQUIRL cpl. with couplings Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
20195000 ZARGOMAT- and gluing gun with 15 m cable, 25 female part Picture
00102228 Mortar pressure gauge 35 mm Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
20200330 Adapter coupling 35-/25 male Picture
20114320 Rotor D 4-3 with pin Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20115310 Stator D 4-3, 1/2 output, green,for clamp Picture
20117000 Clamp D-pumps Picture
00010543 Stator D 4-3 PIN TWISTER green Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Special mortar

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
20117000 Clamp D-pumps Picture
20115310 Stator D 4-3, 1/2 output, green,for clamp Picture
20114320 Rotor D 4-3 with pin Picture
20118400 ROTOQUIRL cpl. with couplings Picture
00010543 Stator D 4-3 PIN TWISTER green Picture
20118780 Tie rods (1 set = 2 pieces) Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
20195000 ZARGOMAT- and gluing gun with 15 m cable, 25 female part Picture
20200330 Adapter coupling 35-/25 male Picture
00102228 Mortar pressure gauge 35 mm Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Masonry mortar

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
20196000 Spraying gun 35 V cap S14 (cone) with drilling Picture
00102228 Mortar pressure gauge 35 mm Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
20104217 Suction flange R-pump with O-ring, l = 200 mm Picture
20118820 Pressure flange R-pump Picture
20116350 Stator R 7-2.5 Picture
20114851 Rotor R7-2.5 with shot peening Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture
20117800 Clamp R-pump Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Grouting mortar

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
20195000 ZARGOMAT- and gluing gun with 15 m cable, 25 female part Picture
20118400 ROTOQUIRL cpl. with couplings Picture
20114320 Rotor D 4-3 with pin Picture
20115310 Stator D 4-3, 1/2 output, green,for clamp Picture
20117000 Clamp D-pumps Picture
00010543 Stator D 4-3 PIN TWISTER green Picture
20118780 Tie rods (1 set = 2 pieces) Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture
20200330 Adapter coupling 35-/25 male Picture
00102228 Mortar pressure gauge 35 mm Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment