PFT Accessories guide

Plaster / render

Plaster/render

Insulating mortar

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

No data available.

Gypsum plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

No data available.

Gypsum-lime plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

No data available.

Light gypsum plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

No data available.

Scratch coat

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

No data available.

Light base coat

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

No data available.

Loam plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

No data available.

Tyrolean finish

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

No data available.

Restoration plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
20114320 Rotor D 4-3 with pin Picture
20115310 Stator D 4-3 clampable Picture
20117000 Clamp D-pumps Picture
00010543 Stator D 4-3 PIN TWISTER green Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20118400 ROTOQUIRL cpl. with couplings Picture
20195000 ZARGOMAT- and gluing gun with 15 m cable, 25 female part Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Float finish

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
20114320 Rotor D 4-3 with pin Picture
20115310 Stator D 4-3 clampable Picture
20117000 Clamp D-pumps Picture
00010543 Stator D 4-3 PIN TWISTER green Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20118400 ROTOQUIRL cpl. with couplings Picture
20195000 ZARGOMAT- and gluing gun with 15 m cable, 25 female part Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Levelling compound

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
20114310 Rotor D 4-3 Picture
20115310 Stator D 4-3 clampable Picture
20117000 Clamp D-pumps Picture
00010543 Stator D 4-3 PIN TWISTER green Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103605 Mixing shaft G 4/G 5 for levelling compounds Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Special plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
20114320 Rotor D 4-3 with pin Picture
20115310 Stator D 4-3 clampable Picture
20117000 Clamp D-pumps Picture
00010543 Stator D 4-3 PIN TWISTER green Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20118400 ROTOQUIRL cpl. with couplings Picture
00010468 Glueing pistol with electrical switch-off Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Decoration plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
20114320 Rotor D 4-3 with pin Picture
20115310 Stator D 4-3 clampable Picture
20117000 Clamp D-pumps Picture
00010543 Stator D 4-3 PIN TWISTER green Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20118400 ROTOQUIRL cpl. with couplings Picture
00010468 Glueing pistol with electrical switch-off Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Base coat

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
20114320 Rotor D 4-3 with pin Picture
20115310 Stator D 4-3 clampable Picture
20117000 Clamp D-pumps Picture
00010543 Stator D 4-3 PIN TWISTER green Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20118400 ROTOQUIRL cpl. with couplings Picture
00010468 Glueing pistol with electrical switch-off Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Finish coat plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
20114310 Rotor D 4-3 Picture
20115310 Stator D 4-3 clampable Picture
20117000 Clamp D-pumps Picture
00010543 Stator D 4-3 PIN TWISTER green Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103605 Mixing shaft G 4/G 5 for levelling compounds Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment