PFT Accessories guide

Plaster / render

Plaster/render

Insulating mortar

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

No data available.

Gypsum plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00021399 Rotor D 5-2.5 Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Gypsum-lime plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00021399 Rotor D 5-2.5 Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Light gypsum plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00021399 Rotor D 5-2.5 Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103610 Mixing shaft G 4/G 5 for light plaster Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Scratch coat

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00021399 Rotor D 5-2.5 Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103610 Mixing shaft G 4/G 5 for light plaster Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Light base coat

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00021399 Rotor D 5-2.5 Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103610 Mixing shaft G 4/G 5 for light plaster Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Loam plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00021399 Rotor D 5-2.5 Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103610 Mixing shaft G 4/G 5 for light plaster Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Tyrolean finish

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00021399 Rotor D 5-2.5 Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103610 Mixing shaft G 4/G 5 for light plaster Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Restoration plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00002070 Rotor D 5-2.5 with tang Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20118400 ROTOQUIRL cpl. with couplings Picture
20118000 ROTOMIX for D-pumps cpl. with coupling 35 female and coupling reduction 35/25 male ID 24 Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Float finish

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00002070 Rotor D 5-2.5 with tang Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20118400 ROTOQUIRL cpl. with couplings Picture
20118000 ROTOMIX for D-pumps cpl. with coupling 35 female and coupling reduction 35/25 male ID 24 Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Levelling compound

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00002070 Rotor D 5-2.5 with tang Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20118400 ROTOQUIRL cpl. with couplings Picture
20118000 ROTOMIX for D-pumps cpl. with coupling 35 female and coupling reduction 35/25 male ID 24 Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Special plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00002070 Rotor D 5-2.5 with tang Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20118400 ROTOQUIRL cpl. with couplings Picture
20118000 ROTOMIX for D-pumps cpl. with coupling 35 female and coupling reduction 35/25 male ID 24 Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Decoration plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00002070 Rotor D 5-2.5 with tang Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20118400 ROTOQUIRL cpl. with couplings Picture
20118000 ROTOMIX for D-pumps cpl. with coupling 35 female and coupling reduction 35/25 male ID 24 Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Base coat

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00021399 Rotor D 5-2.5 Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Finish coat plaster

Grain size max. mm Conveying output* l/min (at approx. 400 rpm) Conveying distance* max. in m, 25er hose Conveying distance* max. in m, 35er hose Working pressure max. bar Rotor / Stator  

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no. Description  
00021399 Rotor D 5-2.5 Picture
00010904 Stator D 5-2,5 PIN TWISTER TWISTER Picture
20118780 Tie rods (1 set = 2 pieces) Picture
20103510 Mixing shaft G 4 / G 5 hard-faced Picture
00102228 Mortar pressure gauge 35 mm Picture
20200330 Adapter coupling 35-/25 male Picture
20190002 Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl. Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00493686 Water pressure booster pump PFT AV 3000, 50 Hz Picture

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment