Mixing pumps

continuously and full automatically mix and pump all ready-mixed dry mortars suitable for machine use and on gypsum, lime and cement base with water into ready-to-use mortars.

The continuation of a successful story … The robust and compact mixing pump for different applications on construction sites

Animation: Application video PFT RITMO XL

Brochure: Mixing pump PFT RITMO XL
Brochure: Mixing pump PFT RITMO XL FC-230/400V

Description

The new compact mixing pump in 230 V alternating current or 400 V three-phase designed for pumping, spraying and applying of all factory blended premixed dry mortars, pasty materials and many more up to a grain size of max. 7 mm*.

You can easily adjust the pump capacity to your requirements by changing the pump. The PFT RITMO XL can also be pneumatically feeding via an injection hood that is available optionally. It can be disassembled into three modules.

Applications

For all premixed dry mortars such as:

  • Premixed gypsum plaster
  • Lime gypsum plaster
  • Cement based renders
  • Lime based plaster
  • Lime-cement render 
  • Masonry mortar
  • Insulation plaster 
  • Filling plaster
  • Glueing mortar
  • Floor screed
  • Liquid filling compound 
  • such as pasty materials
…and many more

Advantages

Advantages at a glance:

  • either in 230 V alternating current or 400 V three-phase version available or as combination of 230/400 V
  • stable and compact modular construction
  • slim construction width of just 70 cm
  • can be universally used
  • flexible use of pumps
  • high capacity
  • easy operation and maintenance work
  • easy and fast cleaning thanks to the rubber mixing zone
  • to vary in filling height of 85 - 101 cm
  • disassembly and transportation by one person without any tools
  • air compressor integrated
  • agitator can be assembled, PFT ROTOMIX or PFT ROTOQUIRL

Tech. data

Part no. Description Details

Accessories

Part no. Description Picture
20114810 Rotor R 7-1.5 with tang Picture
20116200 Stator R 7-1.5 ochre, for clamp Picture
20117800 Clamp R-pump Picture
00195243 Suction flange R-pump for rubber zone galv. Picture
20118050 ROTOMIX R-pumpscpl. with 35 mm coupling and reduction 35/25 Picture
20118400 ROTOQUIRL cpl. with couplings Picture
20118407 Cover ROTOQUIRL R-pump Picture
00021104 RONDO DN35 - 10 m 
hydraulically fitted male part | female part 
Picture
00021119 RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings Picture
00021105 RONDO 35 mm, 20 m, cpl. with hydraulically fitted couplings Picture
00021123 RONDO pouring hose 35 mm, 13.3 m, cpl. with male part coupling Picture
00021273 RONDO pouring hose 35 mm, 20 m cpl. with male part coupling  
20210600 Sponge ball Ø 50 mm for RONDO 35 mm p.u. = 20 pcs Picture
20456916 Remote control cable 50 m on cable drum Picture
20456924 Remote control cable 50 m with on/off-switch and control lamp Picture
Accessories / Equipment recommended for:
PFT RITMO XL 400: Finishing and base coats with little air ( < 0,25 Nm³ / min)
PFT RITMO XL 400: Finishing and base coats with plenty of air (> 0.25 Nm³ / min)
PFT RITMO XL 400: Scatch coat
PFT RITMO XL 400: Adhesive mortars / grouting mortars
PFT RITMO XL 400: Floor screed up to a conveying output of 40 l/min
PFT RITMO XL 400: Floor screed up to a conveying output of 60-80 l/min
PFT RITMO XL 230/400: Finishing and base coats with little air ( < 0,25 Nm³ / min)
PFT RITMO XL 230/400: Finishing and base coats with plenty of air (> 0.25 Nm³ / min)
PFT RITMO XL 230/400: Scratch coat
PFT RITMO XL 230/400: Adhesive mortars, grouting mortars
PFT RITMO XL 230/400: Floor screed up to a conveying output of 40 l/min
PFT RITMO XL 230/400: Floor screed up to a conveying output of 60-80 l/min - ONLY FOR USING 400 V
PFT RITMO XL FC 230: Finishing and base coats with little air ( < 0,25 Nm³ / min)
PFT RITMO XL FC 230: Finishing and base coats with plenty of air (> 0,25 Nm³ / min)
PFT RITMO XL FC 230: Adhesive mortars / grouting mortars
PFT RITMO XL FC 230: Filler
back to basic configuration