Equipment / Tools / Accessories

Equipment / Tools / Accessories

Various field-tested and useful special tools and accessories are part of the PFT range of products.



even allows cutting due to its cutting height of 1,110 mm and cutting depth of 310 mm in different formats: "height" and "thick"? No problem for the PFT CUTMASTER.



Overlap cuts

Thanks to the depth stop attachment screw at the cutting bow you can easily achieve cuts for wall projections and overlaps.





PFT CUTMASTER also handles cut-outs for e.g. cable ducts or waste water pipes easily thanks to its depth stop.




Mitre cuts

The cutting bow can be adjusted variably to any position. For easy handling the cutting bow locks at 45° and at 90°.




Angular cuts

The two aluminium support brackets can be continuously adjusted and locked between 0° and 90°. The support bracket on the right side ensures that the remaining part of the cut does not fall down. The angular adjustment of the aluminium cutting bow can be fixed by an attachment screw.



New: PFT CUTMASTER 1100 / 310  including cutter for rafters

The hot wire cutting tool PFT CUTMASTER guarantees a clean and exact cutting of heat-insulating panels. Therefore you don’t have material residues on the building site. Angular notched rafter cutouts for the effective exterior insulation can be achieved with the hot wire cutting tool PFT CUTMASTER including cutter for rafters in no time at all. The additional cutting wire of the rafter cut notches angular cutouts cleanly and comfortably. The PFT CUTMASTER including cutter for rafters supports you in the clean and quick working with thermal insulation composite systems.


The powerful PFT MINICUT is just perfect for the building trade. For boards up to a thickness of 140 mm or 230 mm. 

Scope of delivery – PFT MINICUT 140 mm: 
Hot wire cutting tool in case with approx. 3 m power cable, hook, cleaning brush, and operating instructions in a case.

Scope of delivery – PFT MINICUT 230 mm: 
Hot wire cutting tool in case with approx. 3 m power cable, hex driver, cleaning brush, and operating instructions in a case.


Advantages at a glance

  • The PFT CUTMASTER folds flat and is therefore lightweight and can be transported and stored in a space-saving way.
  • Folding feet enable you to work in two working heights. The lowered working positions can be helpful e.g. in confined space conditions in the topmost lift on a scaffold.
  • The combi base plate on the back serves as admission for the integrated support foot or for attachment of a scaffold.
  • The stainless steel protective bow is welded on both sides onto the swivel units. The clamp below serves to protect the spiral cable.
  • The clamp above can be used as eyelet for transport by crane.
  • The fixed mounted transformer permits a high cutting speed and an extremely short heating-up time. The transformer is doubly protected. A thermal fuse is integrated against overheating and a replaceable micro fuse against short-circuit currents.
  • A push button, integrated in the cutting bow reduces the danger of injury at a hot wire and extends the service life of the hot wire.
  • The welted cutting bow prevents that the product gets burred during process of cutting.
  • By the depth stops which are positioned at the hangers you can fix the cutting depth.
  • All straightedges are extremely scrub resistant and recessed at the ground plate and the support brackets.
  • In case of angular cuts a patented “memory device” guarantees rational cutting of e.g. rake angle cuts.
  • Thanks to a second support angle it is possible a second slanted position and furthermore, a fall down of the cut parts is avoided.
  • Also in folded position the hot wire cutting tool stands on the individual feet – no scratching.
  • Thanks to its sturdy lightweight design the PFT CUTMASTER only weigths in at 17 kg.

NEW: PFT CUTMASTER 1100 / 310 including cutter for rafters

  •   Heat insulation of the complete interior and exterior sector
  • Rafter cut for angular face cuts
  • Perfect insulation of the facade, even in difficult places, p. e. under the eaves or window ledges
  • Clean work: hot wire technic avoids flying material residues
  • Press button: switching on / off at the push of a button
  • Scale of length: using the attachment screw, the cutting bow can be locked with millimetre precision
  • Fixable angle adjustments: recurrent adjustments can be fixed with a screw
  • New cutter for rafters: new accessories facilitate cuts on the face (dipping from above into the material being cut)


  • Ready to cut in 10 seconds
  • No dust
  • Protective insulation
  • No electrostatic charge
  • Cutting edge made of stainless steel, can be changed easily

Tech. data

Part no. Description Details


Part no. Description Picture
Recommended accessories
Part no. Description Picture

Part no. Description Picture
00457912 PFT CUTMASTER 1100/250 Picture